We only repair using OEM original manufacturer parts!
All repairs come with a standard 12-month warranty.
Don’t suffer from main dealer pricing any longer!
We repair all seat belt issues, including:
Accident & collision Locked
Cut, frayed or torn
Sticking or jamming
How it works
Order your seatbelt repair service
We will send you a confirmation email, print off your order confirmation form.
Remove your seatbelt
Remove your seatbelt and send it along with your order confirmation form to:
Airbag Team, Sarah Street
Rotherham, South Yorkshire, S61 1EF
Receive your repaired seatbelt
Recieve your repaired seatbelt in the post ready to be fitted into your vehicle
Seat Belt Material Change (Black)
Are your seat belts cut, frayed or torn? Save yourself the expense of buying a new seat belt from your local main dealer by sending your belts into us to have the original material replaced.
For peace of mind our seatbelt materials are tested and certified to manufacturer standards.
Single-Stage Seatbelt Repair
A Single-Stage seat belt is equipped with 1 gas charge. You can identify this gas charge by the single connector or wire plug.
Dual-Stage Seatbelt Repair
A Dual-Stage seatbelt is equipped with 2 gas charges. You can identify the number of gas charges by the two single connectors or wire plugs.
Extra Safety (pre-safe) Seatbelt Repair
The extra safety or pre-safe seatbelts are easily identified as having an electrical motor attached to the belt mechanism.
Solid side seatbelt Repair
The solid side seatbelts are easy to distinguish, they have a fused metal end cap on either one side of the seatbelt or both. You’ll find this type fitted to a lot of the later built vehicles on the road.
Pre-tensioner Seatbelt Repair
The seat belt pre-tensioner can be located on the outside base of either front seat where the seatbelt anchors (these aren’t fitted to all makes and models).
“Excellent communication and speedy turnaround. Saved me over 200 pounds on a new seatbelt
and good to get my old one back that I knew the history of.”
Liam Clarke - Seat belt Repair Customer
Seat belt Repairs
What is your turnaround time?
We are proud to offer a 24 HOUR TURNAROUND on all of our repairs and are strongly committed to it. This means if we receive your package on Monday, it will go out by Tuesday. Please note that this excludes weekends and holidays. Expect delays if you have not paid for the service online, paid the wrong amount or did not include the required information in the box.
I'm getting a code for a seatbelt that works fine?
Blown seat belts do not have to be locked and sometimes show no symptoms of fault. The airbag light and code does indicate that the seat belt is bad and will need to be repaired. Each seat belt is equipped with a gas-charge that if blown, will not work again. We fix these seat belts!
What is the difference between single-stage, dual-stage and triple-stage seatbelts?
The stage of the seat belt is identified by the number of gas-charges it is equipped with. Each charge will have its own connector or wire plug going to it. Inspect your seat belt and identify the number of charges or connectors it has. A single-stage seat belt has 1 plug, while a dual-stage seat belt has 2 plugs. A triple-stage seat belt will have 3 total charges.
How do I remove my old seatbelt?
The SRS airbag module is easy to remove and can be done without a professional mechanic. Though we strongly advise knowledgeable individuals removing an SRS module, it can be done at your own risk by following the easy steps:
1.Disconnect the negative terminal of your car’s battery and wait at least 5 minutes before proceeding.
2. Locate the SRS airbag unit. In most vehicles, it will be under the center console which, between the front seats under the dash or the front driver or passenger seat. Most SRS units will look similar to a metal enclosure and a yellow plug. Others will have a metal enclosure with a black cap.
3.Unbolt the unit and disconnect the wire harness or airbag plugs going to it.